Smart Cruise Control with Stop & Go (SCC w/ S&G) Increases safety and reduces stress by maintaining a set distance to the preceding vehicle, automatically reducing or increasing speed up to a pre-set limit, according to prevailing traffic conditions. In “stop & go” traffic, the pre-determined distance is maintained by SCC after coming to a standstill, restarting the motor when forward movement ahead is detected and a tap is given by the foot on the accelerator. The Leading Vehicle Departure Alert feature notifies the driver when the vehicle in front departs from a standing/stopped state.

FCA is an advanced active safety feature that alerts drivers to emergency situations, braking automatically if required. Using front radar and camera sensors, FCA operates in three stages. Initially warning the driver visually and acoustically, it controls the brake according to the collision danger level, and applies maximum braking force to avoid a collision or minimise damage when a collision is unavoidable. The system is active at speeds of 8 km/h or higher and senses vehicles, pedestrians, and cyclists.

The new IONIQ Electric features Lane Following Assist (LFA). When activated, it keeps the car centred in its lane at speeds between 0 and 150 kilometres per hour on highways and city streets.

The Lane Keeping Assist (LKA) uses the front camera to monitor the lines of the road. In case of an unintended lane departure, it will warn the driver and can apply counter steering torque to guide the car back to the lane.